dbphxnd.info

There are several potential financing options available to cash-strapped businesses that need a healthy dose of working capital. A bank loan or line of credit is often the first option that owners think of – and for businesses that qualify, this may be the best option.

In today’s uncertain business, economic and regulatory environment, qualifying for a bank loan can be difficult – especially for start-up companies and those that have experienced any type of financial difficulty. Sometimes, owners of businesses that don’t qualify for a bank loan decide that seeking venture capital or bringing on equity investors are other viable options.

But are they really? While there are some potential benefits to bringing venture capital and so-called “angel” investors into your business, there are drawbacks as well. Unfortunately, owners sometimes don’t think about these drawbacks until the ink has dried on a contract with a venture capitalist or angel investor – and it’s too late to back out of the deal.

Different Types of Financing

One problem with bringing in equity investors to help provide a working capital boost is that working capital and equity are really two different types of financing.

Working capital – or the money that is used to pay business expenses incurred during the time lag until cash from sales (or accounts receivable) is collected – is short-term in nature, so it should be financed via a short-term financing tool. Equity, however, should generally be used to finance rapid growth, business expansion, acquisitions or the purchase of long-term assets, which are defined as assets that are repaid over more than one 12-month business cycle.

But the biggest drawback to bringing equity investors into your business is a potential loss of control. When you sell equity (or shares) in your business to venture capitalists or angels, you are giving up a percentage of ownership in your business, and you may be doing so at an inopportune time. With this dilution of ownership most often comes a loss of control over some or all of the most important business decisions that must be made.

Sometimes, owners are enticed to sell equity by the fact that there is little (if any) out-of-pocket expense. Unlike debt financing, you don’t usually pay interest with equity financing. The equity investor gains its return via the ownership stake gained in your business. But the long-term “cost” of selling equity is always much higher than the short-term cost of debt, in terms of both actual cash cost as well as soft costs like the loss of control and stewardship of your company and the potential future value of the ownership shares that are sold.

Alternative Financing Solutions

But what if your business needs working capital and you don’t qualify for a bank loan or line of credit? Alternative financing solutions are often appropriate for injecting working capital into businesses in this situation. Three of the most common types of alternative financing used by such businesses are:

1. Full-Service Factoring – Businesses sell outstanding accounts receivable on an ongoing basis to a commercial finance (or factoring) company at a discount. The factoring company then manages the receivable until it is paid. Factoring is a well-established and accepted method of temporary alternative finance that is especially well-suited for rapidly growing companies and those with customer concentrations.

2. Accounts Receivable (A/R) Financing – A/R financing is an ideal solution for companies that are not yet bankable but have a stable financial condition and a more diverse customer base. Here, the business provides details on all accounts receivable and pledges those assets as collateral. The proceeds of those receivables are sent to a lockbox while the finance company calculates a borrowing base to determine the amount the company can borrow. When the borrower needs money, it makes an advance request and the finance company advances money using a percentage of the accounts receivable.

3. Asset-Based Lending (ABL) – This is a credit facility secured by all of a company’s assets, which may include A/R, equipment and inventory. Unlike with factoring, the business continues to manage and collect its own receivables and submits collateral reports on an ongoing basis to the finance company, which will review and periodically audit the reports.

In addition to providing working capital and enabling owners to maintain business control, alternative financing may provide other benefits as well:

It’s easy to determine the exact cost of financing and obtain an increase.
Professional collateral management can be included depending on the facility type and the lender.
Real-time, online interactive reporting is often available.
It may provide the business with access to more capital.
It’s flexible – financing ebbs and flows with the business’ needs.
It’s important to note that there are some circumstances in which equity is a viable and attractive financing solution. This is especially true in cases of business expansion and acquisition and new product launches – these are capital needs that are not generally well suited to debt financing. However, equity is not usually the appropriate financing solution to solve a working capital problem or help plug a cash-flow gap.

A Precious Commodity

Remember that business equity is a precious commodity that should only be considered under the right circumstances and at the right time. When equity financing is sought, ideally this should be done at a time when the company has good growth prospects and a significant cash need for this growth. Ideally, majority ownership (and thus, absolute control) should remain with the company founder(s).

Alternative financing solutions like factoring, A/R financing and ABL can provide the working capital boost many cash-strapped businesses that don’t qualify for bank financing need – without diluting ownership and possibly giving up business control at an inopportune time for the owner. If and when these companies become bankable later, it’s often an easy transition to a traditional bank line of credit. Your banker may be able to refer you to a commercial finance company that can offer the right type of alternative financing solution for your particular situation.

Taking the time to understand all the different financing options available to your business, and the pros and cons of each, is the best way to make sure you choose the best option for your business. The use of alternative financing can help your company grow without diluting your ownership. After all, it’s your business – shouldn’t you keep as much of it as possible?

Overview of this ProfessionPharmacy Technicians are the ones who typically fill your prescriptions. It’s difficult to envision a pharmacy running well without them. A licensed pharmacist supervises them, but they basically handle most of the workload.It’s common for pharmacy techs to be employed in hospitals, nursing homes, clinics as well as pharmacies. Certification requirements change by state. However, regardless of your state’s requirements, your potential employer could demand it. Pharmacy tech schooling is surely recommended if you’re thinking about this line of work.What Might You Expect on a Normal Work Day?If you work at a hospital you might need to prepare intravenous (IV) solutions and present medication to hospital patients. Blood thinners and sedation drugs are the types of non-commercial drugs you may need to be familiar with. A number of hospitals require their technicians to have formal training and certification before handling such sensitive medications.Job Options & Wage PotentialDo not be mislead into believing that the pharmacy tech occupation is one lacking career advancement. In a retail pharmacy environment, one example of career promotion is getting promoted to manager of the pharmacy. Nuclear pharmacy and chemotherapy are career growth opportunities for those who work in a hospital. One more option for furtherance is moving to other health care specialties like medical billing and transcription.The median hourly wage for pharmacy techs starts at $8-10. It’s doable to make a lot more if you get more work experience in your specialization.What are the Requisite Certifications and Degrees?Each state sets their state specific requirements for pharmacy technicians, presently there are no federal guidelines. In many states, training and taking a state test is a requirement. Certification is granted by the Pharmacy Technician Certification Board (PTCB) or the Institute for the Certification of Pharmacy Technicians (ICPT) in the U.S.After passing the certification examination, you will be a Certified Pharmacy Technician (CPhT). This title gives you two distinct advantages over non-certified job applicants: you appear more qualified and you also increase the chance of a higher starting salary.If you are interested, get started now in a pharmacy tech training course. How long does training normally take? Normally 6 months to 2 years. And because there are more jobs available than people to fill them you’re certain to get work soon.Working in CanadaIf you are considering a move to Canada, you will need to apply for a license in that country. Canada’s qualification to practice as a pharmacy tech differ from the US, so make sure you read up on what you need to do in advance so you’re not stuck without a job after the move. You will need to sit for the Pharmacy Technician Qualification Examination issued by the PEBC.Does this profession sound interesting to you? If so, we recommend you start on your schooling as soon as you are able.

Why Should we care if we can use Dynamics Business Central for Manufacturing?Given the disruption of the past year, a lot of businesses are investigating ways to work remotely and in a hybrid work environment. There are a few technologies that manufacturing companies need to use that don’t work well remotely. One of them is ERP systems. That’s why we should care about Dynamics Business Central for Manufacturing.If you are looking to replace an ERP system because you want to ensure it facilitates remote work, cloud ERP is where you need to look. My experience is almost entirely with what is often called “SMB” or Small and Medium Business manufacturers.There are not a lot of good, modern cloud based ERP systems in the mid-market / SMB space. There are even less that really support manufacturing. That means that the best cloud systems are priced out of most manufacturers budget.Oh, In case you are wondering, Microsoft defines SMB as businesses with less than 250 computers. That’s a pretty large manufacturer.What is Business Central?In the simplest terms, Business Central is the new brand name for Microsoft Dynamics NAV. In all the ways that count this cutting edge new cloud based ERP is the old Dynamics NAV reimagined in the cloud.Microsoft did not shirk on the technology either! They have a boat load of money, and they were willing to spend a lot of it on Business Central.The full name of the product is Dynamics 365 Business Central. That 365 should look familiar, because it appears on Office 365, Microsoft 365 etc…This does mean that Business Central is part of the same suite of products you might already be using for your Outlook email, Teams communication, Microsoft Word or Excel productivity tools. And yes, that is a big advantage to Microsoft. It doesn’t mean that it will work in Manufacturing however – so that remains to be seen.How does it compare with more traditional manufacturing ERP?I recently wrote a blog comparing Dynamics Business Central for manufacturing with a pretty well respected mid-market pure manufacturing ERP called Infor Visual ERP.I worked extensively with Visual ERP for almost 20 years (ironically I never sold a copy in all that time). I ran the firm that people who had trouble with the system came to for help.When I migrated my business away from Infor Visual, I investigated a lot of products. I settled on Dynamics NAV (which later became Business Central) after significant research.By 2014 we had started switching Visual ERP customers Microsoft Dynamics NAV manufacturing. There are a few small areas that Visual might do a bit better in. That is more than overcome by two main factors that make Microsoft Dynamics Business Central for manufacturing really shine.CustomizabilityDynamics NAV and now Business Central are extremely easy to program, which let us enhance it in ways you absolutely could not with Visual. It’s so easy to program that we are essentially giving away “Missing” Visual features when we sell the product.This customization let us plug any holes we found. It also allowed us to do the one thing Visual customers always cried about. We could make small, easily maintained, incremental changes. We could adjust the system to make it work better for the customer.We avoided any kind of massive programming (although in my time I’ve seen other partners who didn’t avoid the same). We focused on making really useful changes that allowed the customer to get rapid benefits. This made a huge difference to customers. It can be a game changer when a very small change saves staff hours every week.Dynamics 365 AppSource AddonsMore or less related is the existence of addons for Microsoft Dynamics products.When we first started selling Dynamics NAV for manufacturing, there was no AppSource. AppSource is like the Google Play store or Apple Apps store. It’s a place to go and rapidly (in seconds really) install addons.In the early days these addons existed, were certified by Microsoft, but did not exist in any central location. Today things are even better. With Appsource we can really enhance Dynamics Business Central for manufacturing. I mention a couple of those modules below.Wait! I have to get AddonsThere are 2 schools of thought about ERP systems. You want to get a really good ERP system with: great accounting; inventory control; purchasing and sales; CRM; scheduling; shop floor execution etc… Imagine you wanted to get a similarly priced personal item. Say you wanted to get a vehicle and a camping trailer. You went to 2 dealerships. A Ford and the other GMC.In our fake and hypothetical Ford dealer they sell their F150 truck, with a Ford Radio, Ford Tires, and a Ford brand camping trailer. This specific ford’s rims are totally custom and don’t fit other makes of tires. Nobody makes a radio that fits their dash. The trailer is OK but not the best you’ve seen. The trailer hitch is custom built for their truck. You have no choice. But wait! It’s all in one warranty so if anything goes wrong you can blame them and they have to fix it!GMC sells their big truck by itself. You can choose which tires you get, so you want Michelin tires. You can add a radio, and decide to get the more expensive but awe inspiring Bose Radio. They don’t sell trainers, so you buy an Airstream. You would never complain about GM not making their own tires or radio, and you would never want the Ford where you had no choice but to get what they sell.Why do you want an ERP that forces you to get their proprietary versions of things instead of buying the best you can afford?Out of the Box Manufacturing Features in Business CentralDynamics Business Central manufacturing capabilities are identical to what was in Microsoft Dynamics NAV manufacturing.There are a set of core modules in the Essentials edition of Business Central. These include: sales orders, inventory and purchase orders; assembly management; jons (project accounting and management); and warehouse management.Some customers use the Essentials version exclusively. It works fine depending on your mode of manufacturing (see below).Upgrading to the Premium version adds extra capabilities. You get Bills of Materials; Routings; Machine and Work Centers; Capacity Planning; Production Orders and other purely manufacturing oriented features.Premium also adds Service management, which is used in the Engineer to Order space quite frequently, but not often in regular manufacturing.Detailed Features in Manufacturing – in the Premium VersionProduction Order Management

Agile Manufacturing

Version Management

Inventory Planning

Demand Forecasting

Machine Centre Management

Capacity Planning

Finite Loading

Production Bill of Materials

Production Scheduling

Supply Planning
Modes of Manufacturing for Business CentralI tend to think of manufacturing ERP projects in terms of the mode of manufacturing being used. There are different definitions from different organizations (mainly APICS) but these are the ones I tend to see and my take on how good Business Central for manufacturing is for these modes.Engineer to Order – ETOThis is my favorite. I worked at an ETO for a few years before starting my own business. Dynamics Business Central for Manufacturing includes a really powerful project accounting module called Jobs. Since ETO manufacturers are really project manufacturers, this jobs module is a solid foundation. There are a few additional addons that I strongly recommend (including one that we created) to make the fit even better.Overall – Business Central for ETO is really good.Make to Order and Make to Stock – Production ManufacturingMake to Order and Make to Stock are usually two separate modes of manufacturing (and they are) but I combine them into one mode I call Production Manufacturing. The out of the box manufacturing modules that are part of Business Central Premium work great for these businesses. Many of them also want the addins that I list below – which are great extra features.Job ShopsJob shops tend to come in the biggest variety and tend to actually not fit that well into either ETO or Production Manufacturing. I’d want to see the Job Shop to see whether it’s more of a micro-production shop (very common – I call these “repetitive job shops”) or whether it’s more of a custom mini-project manufacturer like a light ETO.These businesses vary a lot in what they make. A food co-packer is technically a job shop. So is a welding service business, a small machine shop etc…Whatever the case, it is a good fit for Dynamics Business Central for manufacturing.Process ManufacturingProcess Manufacturing is usually related to making one of the following:

Cosmetics

Chemicals

Nutraceuticals

Pharmaceuticals

Food manufacturing
Process manufacturing needs some heavy duty addons for Business Central to work properly. This is outside my comfort zone to be honest. The regulations and batch manufacturing processes are really unique. I have a few colleagues that I send these kinds of prospects to. Those addons for Business Central are extremely good, and handle this industry very, very well.Graphics Arts ManufacturingPrint Manufacturing is it’s own sub-type, really a form of either Job Shop or Production Manufacturing depending on what they make. These businesses don’t work as well out of the box with Dynamics Business Central for Manufacturing. They usually fall into these categories.

Commercial Print (magazines, business carts, posters, flyers etc. – a real Job Shop)

Folding Cartons (think a toothpaste box, or cereal box. Can be production or Job Shop)

Flexible Packaging (these companies make the plastic bags you get consumer goods in)

Labels (could be a wine bottle label, or a shampoo bottle, or your aspirin).

Wide Format (think huge banners, giant photographs on walls in a mall etc.)
This mode of manufacturing has a really great addon for Business Central called PrintVis. PrintVis is a Print manufacturing MIS software addon that turns Business Central into arguably the best Print MIS in the market.Add-ins Recommended by MeMy team has reviewed many addon solutions since we started working with Business Central for manufacturing. Here are our top choices:InsightWorks Shop Floor Insights (SFI)This is a manufacturing execution system for collecting job costing data (time), production reporting and materials use in real time. Comes with a nifty scheduling tool also.InsightWorks Warehouse Insights (WHI)This product is my favorite wireless barcoding solution for warehouse management. It runs on most of major brands of wireless devices used in warehouses today. I think it’s a great mid-level warehouse management solution.Netronic Visual Production SchedulerFor those who need a a graphical drag and drop scheduler, Netronic is the industry standard for Business Central. Their Visual Production Scheduler is more or less for visualizing and manually editing the schedule. The Advanced Production Scheduler is more robust and will do best fit scheduling.ConclusionWe’ve taken a look at using Dynamics Business Central for manufacturing in this article. I’ve had the opportunity to oversee the implementation of this system in more than 50 companies, and so far, so good. For that SMB manufacturer with 20 employees who work in the office and 60 that work in the shop – this is a great system. We’ve got a few customers with 500+ total employees using it very successfully. We also have a few with 10 total employees, and they are able to make it work.If you are a manufacturing company that is in the small or medium market (again – less than 250 computers) looking for ERP I strongly suggest you look at Microsoft Dynamics. I can confidently say that as an ERP Dynamics Business Central for manufacturing is a great fit.